From selection to samples, state the requirement clearly

Start with the application and problem, then review datasheets, packages and circuit conditions. Crystal and LED products need different information, so prepare them separately to help the contact respond effectively.

Contact us
An SMD quartz crystal, a clear-lens LED and a star-carrier LED

How we can help

  1. Specification and selection

    Review product direction by frequency, package, operating temperature, drive conditions and application requirements.

  2. Samples and alternatives

    Share the application, current part number and estimated volume to define sample and alternative evaluation conditions.

  3. Circuit and mechanical review

    Review crystal, oscillator, LED and optoelectronic requirements item by item against the actual electrical and mechanical conditions.

Technology basics

Piezoelectric quartz

Quartz is silicon dioxide with both piezoelectric and inverse piezoelectric effects: stress produces a surface potential, while an electric field displaces charge and deforms the crystal. Together they create periodic vibration, giving the crystal its frequency.

Prepare an engineering question for review

Initial selection
Include the IC, package space and target conditions; for LEDs, add drive current, color and cooling method.
Alternative-part comparison
Provide both datasheets and compare dimensions, pin assignments and test conditions, not appearance alone.
Sample issues
Record board revision, component lot, power, environment and test method; identify measurement points in photos or waveforms.
Attachments and confidentiality
Confirm what can be shared and agree on the transfer method before sending confidential circuits or customer data.
A star-carrier LED fastened to a finned heatsink

Common questions

Does the same package mean a direct replacement?

Dimensions alone are not sufficient. Check frequency, load or output conditions, pin assignments and the application circuit, then evaluate samples.

Can I ask before gathering all test records?

Start with the application, existing product and observed problem, along with any available circuit and measurement conditions.